Larger furnace build

I have opted to use the 1.5HP TEFC motor on the muller.   The drive bits from the spa beds are too weak.  So I either have to make a stronger drive system or use the worm drive.

I already purchased 1" bearing and pillow blocks.  So I am headed in that direction.

Did the Amarillo trip and did not get sand or gutters.  Just too much to do in a day.

Wore us both out.  2 days to recover.

Aug 30 or there about LOL

Cut into the water tank.  The Diablo  blades are great.

Need to figure out the height. 

inches

5 to top of bottom, its curved
2 for wool

1/2 for satanite

3/4 for drain

2 for tyre  (this is generous)

2 more to keep flame off crucible

11 for Salamander A20 Cruciable + 3/4 top clearance

23 inches

Going for an oil burner with propane preheat

Thinking of a stainless exhaust pipe for the burner tube